Shenzhen City, Yan Chau environmental protection material Co. Ltd.
Contact: Mr. Sun
Cell phone: 13077866296
Web site: www.yzhbcl.com
Address: Guangdong, Hong Kong and Macao Wan District, Shenzhen City, Longgang city center zhugushi Road No. 88
Color classification methods commonly used are the following:
According to the vector classification: PE PP ABS Color Masterbatch, masterbatch, masterbatch, masterbatch, masterbatch and other EVA PVC
By type: injection blow molding masterbatch, masterbatch, masterbatch spinning etc.
The varieties can be divided into different grades, such as:
1. advanced injection masterbatch:
It is used for cosmetic packing box, toy, electrical appliance shell and other advanced products.
2. ordinary injection masterbatch:
Used in general daily plastic products, industrial containers and so on.
3. senior film masterbatch:
A blow molding for super thin products.
4. ordinary film masterbatch:
It is used for blowing and coloring of general packing bags and woven bags.
5. spinning color masterbatch:
For the textile fiber coloring pigment, fine particles, high concentration, strong coloring, resistant to heat and light.
6. grade masterbatch:
It is used to produce low-grade products, such as garbage cans, low-grade containers, and so on, which are not high in color quality.
7. special masterbatch:
According to the user specified for products of plastic varieties, use the same plastic as the carrier made of color masterbatch. Such as PP and ABS respectively by PP Color Masterbatch, ABS as carrier.
General: also used some resin masterbatch (often low melting point PE) as a carrier, but it can be applied to other resin except the carrier resin coloring.
8. general masterbatch:
General color is relatively simple, but the disadvantage is more, users are advised to use special color masterbatch.
The heat-resistant special masterbatch is generally compatible with products for the plastics, at normal temperature, can be assured use. Only in the following circumstances will cause varying degrees of discoloration, one is that the temperature exceeds the normal range, one is that the shutdown time is too long.
Compared with the 9. Color Masterbatch coloring and coloring pelletizing has the following advantages:
9.1. coloring and processing are completed once, avoiding the heating process of the plastic with the granulation and coloring, which is beneficial to the protection of the quality of the plastic products.
9.2. makes the production process of plastic products simplest.
9.3. can save a lot of electricity.