Shenzhen City, Yan Chau environmental protection material Co. Ltd.
Contact: Mr. Sun
Web site: www.yzhbcl.com
Address: Guangdong District, Shenzhen City, Longgang city center zhugushi Road No. 88
Plastic pallets, plastic turnover boxes, plastic boxes, plastic logistics boxes, plastic parts boxes and plastic garbage cans are easy to produce bubbles in the production process. Plastic defoaming masterbatch can effectively eliminate these bubbles.
Plastic defoaming masterbatch: high efficiency defoaming masterbatch (also called moisture removal mother material, water absorbing material)
The high efficiency defoaming masterbatch is suitable for all kinds of enterprises which use PE and PP recycled plastic to produce products. The trace moisture contained in raw materials has a very serious impact on the production of plastic products. Therefore, enterprises generally use drying equipment to increase drying equipment, which is a great waste of energy and manpower, and increases the cost of products. Use the masterbatch, which only needs to be added in the raw materials, the production process of the products without any adjustment, it can eliminate the problems caused by all water bubbles, moire, cracks, spots, no adverse effects on physical and mechanical properties of products, energy saving, high production efficiency and reduce cost. The masterbatch is nontoxic, no odor, no corrosiveness, harmless to the human body.
The method of use: mixing this masterbatch with the raw material directly, can be processed and produced. As for blow molding production, add a ratio of 1% to 2%; as for sheet and injection production, add a ratio of 2% to 5%; the specific proportion, according to the plastic condition of damp, by the user at.
Application area: widely used in membrane products, bag products, sheet products and injection products, etc. five, technical indicators: test items, appearance, grey and white particles, plasticizing good density: (g/cm3) 1.50.1 melt flow rate (g/10min) 15 ~ 25 volatile matter (%) 1.50.5
Note: 1. of the masterbatch before use to prevent moisture absorption; when used in 2. is that the use of ingredients is preferred; 3. not common heating and damp plastic drying, so as to avoid the processing of poor quality; 4. before opening the package to check whether the packaging intact, masterbatch and will not run out as soon as possible heat sealing packing.
Storage conditions: keep in a clean, dry, dry, cool, clean place. Do not allow the packaging of the mother grain to be damaged and open in storage so as to avoid sun exposure and rain.